EASY CUT
BEST CUT
SILVER CUT
EXTREME
INTENSIVE
GLG offers 5 different kind of coatings for every specific application.
Each coating presents its own features and it is dedicated to a particular cutting need.
EASY CUT
Easy Cut is a surface coating with 3 microns thickness layer, with a Titanium base, yellow colored, with the following characteristics:
- It has a microhardness of 2.300 – 2.500 (HV 0,05)
- Friction Coefficient: 0,55
- Oxidation Temperature: 500º
BEST CUT
Best Cut is a surface coating with 2,5 microns thickness layer, with a Titanium and Carbon base, which gives a high hardness and a low friction. It is suitable for cutting medium hardness materials up to 800 N/mm2. It has the following characteristics:
- It has a microhardness of 3000 (HV 0,05)
- Friction Coefficient: 0,22
- Oxidation Temperature: 450º
SILVER CUT
Silver Cut is a surface coating with 3 microns thickness layer, with a Chrome base, specially recommended for cutting soft materials such as Brass, Bronze, Aluminium, etc.
It has the following characteristics:
- It has a microhardness of 2.000 (HV 0,05)
- Friction Coefficient: 0,35
- Oxidation Temperature: 600º
EXTREME
Extreme is a surface coating with 3 microns thickness layer, with a Titanium and Aluminium base, combining high toughness of the multilayer structure with high hardness. It allows machining at high speed, with few lubricant and suitable for cutting materials with a hardness up to 1100 N/mm2, Cast Iron, Stainless Steel, etc. It has the fol-lowing characteristics:
- It has a microhardness of 3.400 (HV 0,05)
- Friction Coefficient: 0,45
- Oxidation Temperature: 800º
INTENSIVE
Intensive is a surface coating with 3 microns thickness layer, with a Titanium and Aluminium base with an additive, which gives an additional protection to the coating, due to the lubricant effect, that prevents the chip microwelding. Suitable for cutting materials with a hardness up to 1.100 N/mm2, Stainless Steel, INCONEL, etc.
It has the following characteristics:
- It has a microhardness of 3.500 (HV 0,05)
- Friction Coefficient: 0,40
- Oxidation Temperature: 900º